Calrec unveils Brio console

New console to make debut at BroadcastAsia and KOBA
Calrec Audio's new Brio console will make its Asian debut at KOBA 2016 and BroadcastAsia2016.
Calrec Audio's new Brio console will make its Asian debut at KOBA 2016 and BroadcastAsia2016.

Share

Calrec Audio's new Brio console will make its Asian debut at KOBA 2016 and BroadcastAsia2016.

Brio is one of the most powerful and compact digital broadcast audio consoles in its class, with a comprehensive broadcast feature set that supports a wider breadth of broadcasters while retaining the same levels of quality and customer support for which Calrec is known.

The smallest in Calrec's Bluefin2 family, Brio's control surface measures 89.2cm wide. Its 36 dual-layer fader surface provides more faders in a given footprint than any other audio broadcast console.

Based on Calrec's 20 years of digital development, Brio's uncluttered, compact, and configurable surface gives instant access to a large number of audio paths whilst an intuitive 15.6-inch HD touchscreen UI provides quick access to more in-depth control. A bank of illuminating hardware rotary controls gives fast and precise control over parameters displayed in the touchscreen UI.

Brio is entirely self-contained, with analogue and digital I/O and GPIO built into the surface. Additional expansion I/O slots allow for further I/O integration, and fitting an available Hydra2 module makes it possible to connect to and share audio over Calrec's Hydra2 network.

RP1 Remote Production Unit

Calrec Audio's RP1 remote production unit makes its Asian debut at BroadcastAsia2016 and KOBA 2016 following its highly successful reception at the 2016 NAB Show. Visitors will see a unique live-broadcast product that directly addresses an increasingly prevalent requirement for high-quality content from remote locations.
Remote production offers the ability to capture a broader range of live events, such as sports, news, or regional music festivals.

Broadcasters cannot always justify the time or expense of sending a dedicated outside broadcast truck and a team of skilled on-site operators for these niche events, but they must always ensure that the same high broadcast standards are met.

Calrec's new RP1 remote production engine is a 2U core that contains integrated, FPGA-based DSP, which enables a console surface at another facility to control all mixing functionality. The RP1 core manages all of the processing for IFB routing and remote monitor mixes, and it does so locally with no latency. This level of integration and remote control makes it simple for any remote mix engineer to set up IFB mixes and eradicates any delay for remote listeners or presenters.

The RP1 core quickly embeds audio into existing video-transport mechanisms, while its modular I/O backbone accepts any of Calrec's I/O cards. This versatility means the RP1 can connect via analogue, AES, MADI, SDI, and the latest AoIP solutions from AES67, Ravenna, Dante, and SMPTE 2022.

 

Most Popular

Editor's Choice

StarzPlay’s tech powers India’s Lionsgate Play
Provides managed services, developed by StarzPlay, to mark successful launch of Lionsgate Play ...
Subscribe to Digital Studio Middle East
The latest editor of Digital Studio Middle East, the foremost and most respected platform for ...
Dubai's Faisal Hashmi working on feature film
10 short films in 10 years has earned Faisal Hashmi international plaudits at film festival, ...

Don't Miss a Story