GatesAir Brings Transmission and Networking Innovations to CABSAT

GatesAir will meet with customers and partners to showcase how their latest transmitter designs and intelligent IP networking solutions will strengthen infrastructure in support of FM radio and TV delivery.
Broadcast products, Content delivery, IP networking, Transmitters, News, Delivery & Transmission

Share

GatesAir, a global leader in wireless, over-the-air content delivery solutions for radio and TV broadcasters, will brings its latest innovations for broadcasters to CABSAT, with a focus on single-frequency networks (SFN) and ultra-efficient, liquid- and air-cooled transmission systems. At Stand ZB4-B31, GatesAir will meet with customers and partners to showcase how their latest transmitter designs and intelligent IP networking solutions will strengthen infrastructure in support of FM radio and TV delivery, with a clear return on investment.

“CABSAT is the premiere event in the Middle East to showcase our latest problem-solving innovations for broadcasters seeking to upgrade aging TV and radio infrastructure, launch new services, and lay the groundwork for future digital TV and radio transitions,” said Darren Frearson, vice president of sales, EMEA and APAC, GatesAir. “We look forward to meeting with our customers and partners across the region, and help them deliver rich media services to their audiences by leveraging forward-looking technologies that at once improve performance, raise operational efficiency, and lower their total cost of ownership.”

Radio

GatesAir will showcase its Flexiva FLX liquid-cooled and FAX air-cooled systems, providing broadcasters with an array of high-efficiency transmitter options to strengthen existing FM radio infrastructure and/or establish single-frequency networks to improve coverage and eliminate RF interference. Supporting power levels from 50 watts to more than 88kW, the modular architecture of Flexiva transmitters simplifies scalability through identical power blocks, allowing broadcasters to build systems to their exact specifications. Flexiva transmitters cleanly integrate Intraplex IP Link codecs with built-in SynchroCast technology to support SFNs, time-locking audio delivery via GPS across multiple low-to-medium power transmitters. This allows broadcasters to cover a wider region with a robust, high-quality signal, and efficiently fill in coverage gaps across challenging terrain in a spectrum- efficient manner.

GatesAir’s will highlight its latest Intraplex solution, the Intraplex IP Link MPXp codec, in the Middle East for the first time. Ideal for use in single-frequency networking, studio-to-transmitter applications, the IP Link MPXp codec opens up more signal transport options from a single, compact device at very low bitrates for digital and analog MPX composite audio transport. Such high bandwidth efficiency enables increased packet protection, additional audio and data services and reduced connectivity costs.

The IP Link MPXp is the first FM MPX IP codec to support—separately or together—AES 192 digital (at an industry-low 1.65Mb/s) and analog composite signal transport over a secure and reliable digital IP path. Public internet connections are supported with the inclusion of three network ports, a built-in firewall and patented packet-loss technology, which respectively strengthen redundancy, security and reliability.

Television Transmission

GatesAir will also demonstrate its Maxiva family of UAXTE air-cooled and ULXTE liquid-cooled, IP-enabled UHF TV transmitters in the Middle East for the first time at CABSAT. Available in power levels from 10 watts to 150kW on all modulations, the Maxiva incorporates the latest LDMOS transistors and RF devices for unmatched efficiency and power gains. Overall transmitter efficiency has been raised from 42 to 45 percent, while a 20 percent power increase allows broadcasters to get more power out of a smaller transmitter – substantially driving down operating costs.

The transmitters integrate GatesAir’s latest-generation Maxiva XTE exciter. Featuring a software-defined modulator and native IP inputs, the XTE eliminates the need to retrofit transmitters with additional gear to transition broadcasters from analog to digital TV. This gives broadcasters an out-of-the-box solution to simplify the input and output of DVB-T2 and DVB-T2 Lite multimedia services via local or wide area IP networks. The XTE-driven modulation reduces costs and power consumption by increasing efficiency at the amplification stage, without affecting signal strength. Integrated real-time adaptive correction software enhances signal correction to optimize overall performance.

Most Popular

Editor's Choice

Raising the Bar: Interview with Michael Garin, Image Nation CEO
Michael Garin, CEO of Image Nation on how everything his company does is with the ultimate goal of helping to raise the quality of regional productions
Special Report: Augmented Reality - the hottest trend in broadcast graphics
Augmented reality graphics is one of the broadcast industry’s hottest trends — and there are a wide range of solutions that meet a variety of needs, equipment configurations and on-air looks and features to enhance the viewing experience.
Winning the Streaming Viewer Experience: Interview with Shane Keats of Akamai
Shane Keats is Director of Industry Marketing for Media and Entertainment at Akamai. He focuses on how OTT is transforming the media landscape and was in Dubai to showcase Akamai’s capabilities. Speaking to Digital Studio, he discusses OTT delivery and the different dimensions of the streaming video quality of experience.

Don't Miss a Story